Description
Perfect Surfaces TruGlu 2.0 adhesive has been formulated for the interior installation of rubber flooring, dimensionally stable luxury vinyl tile (LVT), luxury vinyl plank (LVP), vinyl sheet goods (homogeneous/heterogeneous), fiberglass backed sheet vinyl, carpet tile, resilient flooring and cork/rubber/foam underlayment over approved substrates.
TruGlu 2.0 provides superior bond strength, with a high moisture tolerance (not a barrier) and antimicrobial technology. Our easy to use rubber floor glue is easy to trowel on with a very low odor, and has a 12 hour working time. Unlike most floor glue, our TruGlu 2.0 allows for immediate light traffic access, with heavy traffic in 24 hours and heavy rolling loads in 48 hours.
Approved Subfloors:
- APA underlayment grade plywood and OSB
- Associated grade particleboard
- Cement backer board
- Cementitious and anhydrite screeds
- Concrete and radiant heated subfloors that do not exceed 30°C
- Existing well-bonded non-cushion-backed vinyl, tile, and sheet flooring
- Fully secured cork underlayment
- Gypsum and lightweight concrete (primed)
- Terrazzo (properly prepared with all waxes and surface finishes removed)
Cleaning: When adhesive is wet - use a damp cloth to remove excess glue from the product. If TruGlu XD urethane adhesive is dried, it can be removed with mineral spirits or a safe solvent. (Always check compatibility on a test piece of flooring first.)
Cure Time: 12 Hours
Working Time: 12 Hours
Flash Time: 30-60 Minutes
Shelf-Life: 12 months
Storage: Product should be stored between 10-32°C (50-90°F). While the product is freeze-thaw stable, it is necessary to protect it from freezing.
RH: 99%
150-180 SF/ gallon (depending on usage)
Reviews
There are no reviews yet.