Description
FAS1 adhesive boasts immediate grab and quickly builds into an aggressive bond. With a high moisture tolerance and antimicrobial technology, easy to use FAS1 rubber floor glue is simple to apply and produces a very low odour with a 45-minute working time. Unlike most floor glue, quick-set FAS1 floor glue allows for light traffic after just 8 hours, supports heavy traffic in 24 hours, and tolerates heavy rolling loads in just 48 hours.
Approved Subfloors:
- APA underlayment grade plywood and OSB
- Cement backer board
- Cementitious and anhydrite screeds
- Concrete and radiant heated subfloors (not to exceed 85°F)
- Gypsum and lightweight concrete (primed)
- Terrazzo (properly prepared with all waxes and surface finishes removed)
Cleaning: When FAS1 floor adhesive is wet, use a damp cloth to remove excess glue from the product. If FAS1 urethane adhesive has dried, it can be removed with mineral spirits or a safe solvent. (Always check compatibility on a test piece of flooring first.)
Cure Time: 10 Hours
Working Time: 45 minutes
Flash Time: 10 Minutes
Shelf-Life: 12 months
Storage: While FAS1 rubber flooring glue is freeze-thaw stable, it should be stored between 50-80°F and kept from freezing.
RH: Between 30-65%
125-150 SF/ gallon (depending on usage)
Reviews
There are no reviews yet.